Braking is an important part in ensuring safety when using a car. Therefore, it needs regular maintenance in order to be effective.
1. Prepare tools
- Repair kits.
- Forklift jacks.
- Cleaning stuff.
2. Steps to be taken
- Step 1:
First of all, it is necessary to insert the front wheels of the car, release the brake handle, loosen the screws on the rear wheel.
Lift up the rear axle with a jack and use a tool to remove the rear wheel from the axle.
- Step 2: Next, remove the external brake drum, at which point the entire brake drum system will be exposed and you can clean it.
- Step 3: Use clean water and dish soap or use a brake system cleaner and brush to clean the entire drum brake system from dirt including: Brake pads, brake pads, springs, pistons and brake pads.
- Step 4: When you have washed the drum brake system from dust and dirt, check details such as springs, brake pads worn too much can be replaced, the cable controls the hand brake.
- Step 5: When you have checked and adjusted the details, you need to check the brake pedal, if the brake pedal works normally, you can reinstall the brake drum. If the brake pedal is deep or shallow, the brake pedal needs to be adjusted to keep the brake pads relatively close to the surface of the brake drum. Then, reinsert the brake drum and wheel to complete the maintenance and cleaning of the brake.
Source link < Instructions on how to clean and maintain the car drum brake > Automotivesta.com